User Tools

Site Tools


supgsmhybrid:start

GSM Hybrid support page


ONLY THE LATEST FIRMWARE AND LATEST SOFTWARE WILL WORK TOGETHER,

COMBINING OLDER VERSIONS WITH NEWER WILL NOT WORK!!!


Install as Administrator :!:

In order to perform an Firmware update you'll need to set the unit in bootloader mode :!:
To set the unit in bootloader mode:

  1. Take off the Power off the unit
  2. Hold down the “Hook button”
  3. While holding down the “Hook button” you'll have to “Power on” the unit
  4. Release the “Hook button” after 5 seconds
  5. The Unit will show some random LED's as there is no software loaded at this moment


Needed Software Windows MAC OS X Manual Driver Info
Firmware Updatetool v4.10N/APDF - Video AtLibUsbDfu.dll
Java 32 bits (Needed by Firmware update tool) (A)Java X86 - - - -
Visual Studio (Needed by Firmware update tool) (B)Visual Studio - - - -
GSM Hybrid Firmware v1.6.286.0 (..-..-2019) - TXT - -
GSM Hybrid Control (NEW!!) v2.1.0.0 (..-..-2019 FW v1.6.286.0) - V2.1.0.0 Wiki Audio Samples, Spectrum plots

(A) NOTE: This application requires JAVA 32-bits to be installed. Please download and install the latest version first.

(B) NOTE: Some users still receive the error message: Firmware update failed! Make sure console is connected and in bootloader mode, they are probably missing the Microsoft Visual Studio drivers.



FAQ - GSM Hybrid


Software


Question: My firmware update isn't working?
Answer: Link: please follow the steps at this link




GSM

USB



Question: My USB Channel or other USB hardware isn't recognized, what should I do?
Question: When connecting the USB, I receive a message that the maxmimum services or end points are reached. How can I fix this?
Answer: Link: please follow the steps at this link




Repair, Modification


Question: What are the differences in versions?
Answer: Link: please read the info at this link




Troubleshooting & Instructions

supgsmhybrid/start.txt · Last modified: 2020/07/27 12:01 by support