User Tools

Site Tools


This is an old revision of the document!

Airlite support page

Needed software (Install as Administrator):

Software Windows MAC OS X Linux Manual Info
Firmware Updatetool v4.10N/AN/APDFVideo AtLibUsbDfu.dll
Java 32 bits (Needed by Firmware update tool) (A)Java X86 - - - -
Visual Studio (Needed by Firmware update tool) (B)Visual Studio - - - -
Airlite Firmware FW v1.20 (25-03-2019) - - - TXT
Airlite Control v1.0.487.0 (25-03-2019) v1.0.485.1 v1.0.485.0 PDF Port settings / Wiki
Airlite Meters v1.1.266.0 (25-03-2019) v1.1.236.0 v1.1.236.0 PDF -
Airlite Configuration Manager v1.0.826.0 (25-03-2019) v1.0.790.0 v1.0.793.0 PDF -
Airlite Virtual Keyboard Mapper v2.0.96.0 (25-03-2019) - - PDF -
D&R VoIP Connect Button (Works with Firmware V1.20 or later!) v1.0.140.0 (25-03-2019) - - - -
Airlite VoIP (OLD VERSION Skype plugin) v1.0.22.0 - - - -
Airlite StationPlaylist Plugin (C) v1.0 - - PDF -
Airlite SDK v1.1.133.0 - - PDF -
Channel Configuration - - - - Video

(A) NOTE: This application requires JAVA 32-bits to be installed. Please download and install the latest version first.
(B) NOTE: Some users still receive the error message: Firmware update failed! Make sure console is connected and in bootloader mode, they are probably missing the Microsoft Visual Studio drivers.
(C) NOTE: Requires .Net Framework 4.0 installed.

FAQ - Airlite


Question: My firmware update isn't working?

Answer: Link: please follow the steps at this link

Question: How do I open the Airlite or Webstation control?

Answer: Link: please follow the steps at this link

Question: My software (Meters, Configuration manager, Playout software) doen't seem to connect with my mixer?
Communication doesn't seem to work because the Ports seem te be blocked.

Answer: Link: please follow the steps at this link

Question: How do I setup Aircast to work with my Airlite

Answer: Link: please follow the steps at this link

Question: My Meter software shows a distorted screen, what can be the problem?

Answer: Link: please follow the steps at this link

Question: Can we use a dual screen video setup from the automation PC so that the Airlite software screen shows up on a second screen.

Answer: Yes, this is possible. Running the AIRLITE METERS on any pc in your LAN network will work since control data is distributed over the LAN.

Question: Is it possible the get the meter and control information for the Windows software, via the VOIP USB port?
We run Rivendell automation on Linux, so the Linux machine needs to be connected to the Main USB.

Answer: The machine which is connected to the USB MAIN port needs to run the Airlite Control application to distribute the control signals over the LAN (UDP/IP).
In such a way any application on any machine can use the Airlite control signals.
This means controlling/configuring the Airlite or use Airlite Meters for displaying meter data.
Even controlling the Airlite from an external location, i.e. your home (when no one is in the studio) is possible through the Internet.


Question: My USB Channel or other USB hardware isn't recognized, what should I do?

Question: When connecting the USB, I receive a message that the maxmimum services or end points are reached. How can I fix this?

Answer: Link: please follow the steps at this link

Question: Will the Aircast via the USB port be able to play out on more than one fader?

Answer: Yes, the Airlite has four USB AUDIO CODECS available on the USB MAIN port. AIRCAST can play/receive four stereo streams to/from the AIRLITE.

Question: Can you tell me the name of the codec the USB main uses?

Answer: The audio codecs are compatible with Windows, Mac and Linux. (TI PCM2900C).

Question: For the module 4 to 7, if I'm using the stereo line input, are the On button or the fader still be able to send out HID signal over USB that can be programmed to do specific functions in my play-out system?

Answer: Yes, the module always sends control signals over USB, independent of your selected source.




Question: When the Cue Air button is used the sound is routed to the CRM but also to the Phones and the Announcer bus? The doc is speaking about CRM only.

Answer: The Cue Air is routed to CRM and Phones, not to Announcer. This, because the announcer is only interested in the program signal. Monitoring the AIR signal is for the technician / DJ.

On Air, Mic on, Fader start, GPO

Question: I want to connect my Fader start to my CD player, Turntable or other player, how do I have to connect this?

Answer: Instructions can be found in this webpage: Fader start instructions

Repair and Modification

Troubleshooting & Instructions

Airlite promo videos

supairlite/start.1568367136.txt.gz · Last modified: 2019/09/13 11:32 by support