User Tools

Site Tools


supairence:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
supairence:start [2019/12/09 11:06]
support
supairence:start [2020/07/02 14:14] (current)
support
Line 1: Line 1:
 ===== Airence support page ===== ===== Airence support page =====
 +{{:​airence_2015_2x.png?​200|}}\\
 \\ \\
-Needed Software ​ (Install as Administrator):+Install as Administrator :!: \\
 \\ \\
-^ Software ​      ​^ {{wiki:​windows.png?​15}} Windows ​      ​^ {{wiki:​osx.png?​15}} MAC OS X          ^ Manual ^ Driver ^ Info ^+In order to perform an Firmware update you'll need to set the unit in bootloader mode :!: \\ 
 +To set the unit in bootloader mode: 
 +  - Take off the Power off the unit 
 +  - Hold down the "​Encoder"​ of the "​Control surface"​ 
 +  - While holding down the "​Encoder"​ you'll have to "Power on" the unit 
 +  - Release the "​Encoder"​ after 5 seconds 
 +  - The Unit will show some random LED's as there is no software loaded at this moment 
 +\\ 
 + ​Needed ​Software ​  {{wiki:​windows.png?​15}} Windows ​  {{wiki:​osx.png?​15}} MAC OS X   Manual ​  Driver ​  Info  ^
 | Firmware Updatetool|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Firmware Updatetool v4.10 - Setup.exe| v4.10]]|N/​A|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Firmware Update v4.1.pdf|PDF]]| ​ -  |[[https://​youtu.be/​oWNRIsJQvCk|Video AtLibUsbDfu.dll]] | | Firmware Updatetool|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Firmware Updatetool v4.10 - Setup.exe| v4.10]]|N/​A|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Firmware Update v4.1.pdf|PDF]]| ​ -  |[[https://​youtu.be/​oWNRIsJQvCk|Video AtLibUsbDfu.dll]] |
 |Java 32 bits (Needed by Firmware update tool) (A)|[[https://​javadl.oracle.com/​webapps/​download/​AutoDL?​BundleId=238726_478a62b7d4e34b78b671c754eaaf38ab|Java X86]]| ​ -  |  -  |  -  |  -  | |Java 32 bits (Needed by Firmware update tool) (A)|[[https://​javadl.oracle.com/​webapps/​download/​AutoDL?​BundleId=238726_478a62b7d4e34b78b671c754eaaf38ab|Java X86]]| ​ -  |  -  |  -  |  -  |
Line 9: Line 18:
 | Airence Firmware |[[http://​www.d-r.nl/​wiki/​dokudata/​software/​airence_firmware_v1.5.zip| v1.5]]| ​ -  |[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Airence Changelog.txt|TXT ]]|  -  |  -  | | Airence Firmware |[[http://​www.d-r.nl/​wiki/​dokudata/​software/​airence_firmware_v1.5.zip| v1.5]]| ​ -  |[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Airence Changelog.txt|TXT ]]|  -  |  -  |
 |Airence Meters|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Airence Meters v1.9.1 - Setup.exe| v1.9.1 (FW 1.5)]]|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Airence Meters v1.9.dmg| v1.9 (FW 1.5)]] | [[http://​www.d-r.nl/​wiki/​dokudata/​software/​Manual Airence Meters.pdf|PDF]] | [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​airence%20meter%20driver.pdf|Driver]] | [[https://​www.d-r.nl/​wiki/​dokuwiki/​doku.php?​id=faq:​airence| Wiki ]] | |Airence Meters|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Airence Meters v1.9.1 - Setup.exe| v1.9.1 (FW 1.5)]]|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Airence Meters v1.9.dmg| v1.9 (FW 1.5)]] | [[http://​www.d-r.nl/​wiki/​dokudata/​software/​Manual Airence Meters.pdf|PDF]] | [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​airence%20meter%20driver.pdf|Driver]] | [[https://​www.d-r.nl/​wiki/​dokuwiki/​doku.php?​id=faq:​airence| Wiki ]] |
 +^  Optional Software ​ ^  {{wiki:​windows.png?​15}} Windows ​ ^  {{wiki:​osx.png?​15}} MAC OS X  ^  Manual ​ ^  Driver ​ ^  Info  ^
 |Airence Virtual Keyboard Mapper|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Airence Virtual Keyboard Mapper v1.3 - Setup.exe| v1.3 (FW 1.5)]]| ​ -  | [[http://​www.d-r.nl/​wiki/​dokudata/​software/​Manual Airence Virtual Keyboard Mapper.pdf|PDF]] |  -  | [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Keyboard%20Mapper%20Explained.pdf|How it works]] | |Airence Virtual Keyboard Mapper|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Airence Virtual Keyboard Mapper v1.3 - Setup.exe| v1.3 (FW 1.5)]]| ​ -  | [[http://​www.d-r.nl/​wiki/​dokudata/​software/​Manual Airence Virtual Keyboard Mapper.pdf|PDF]] |  -  | [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Keyboard%20Mapper%20Explained.pdf|How it works]] |
 |Airence Virtual Keyboard Mapper (Service)|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Airence Virtual Keyboard Mapper v1.4 - Setup.exe| v1.4 (FW 1.5)]]| ​ -  | [[http://​www.d-r.nl/​wiki/​dokudata/​software/​Manual Airence Virtual Keyboard Mapper.pdf|PDF ​ ]]|  -  |   ​- ​ | |Airence Virtual Keyboard Mapper (Service)|[[http://​www.d-r.nl/​wiki/​dokudata/​software/​Airence Virtual Keyboard Mapper v1.4 - Setup.exe| v1.4 (FW 1.5)]]| ​ -  | [[http://​www.d-r.nl/​wiki/​dokudata/​software/​Manual Airence Virtual Keyboard Mapper.pdf|PDF ​ ]]|  -  |   ​- ​ |
Line 16: Line 26:
 |Channel Configuration| ​  ​- ​ |   ​- ​ |   ​- ​ |   ​- ​ |[[https://​www.youtube.com/​watch?​v=1mD7JKfRlD0| Video]]| |Channel Configuration| ​  ​- ​ |   ​- ​ |   ​- ​ |   ​- ​ |[[https://​www.youtube.com/​watch?​v=1mD7JKfRlD0| Video]]|
 \\ \\
-(For the Airence the AtLibUsbDfu.dll device in the device manager is shown as “Unknown Device”)+(For the Airence the AtLibUsbDfu.dll device in the device manager is shown as “Unknown Device”)\\
 \\ \\
-(A) NOTE: This application requires JAVA 32-bits to be installed. Please download and install the latest version first.+(A) NOTE: This application requires JAVA 32-bits to be installed. Please download and install the latest version first :!: \\
 \\ \\
-(B) NOTE: Some users still receive the error message: Firmware update failed! Make sure console is connected and in bootloader mode, they are probably missing the Microsoft Visual Studio drivers.+(B) NOTE: Some users still receive the error message: Firmware update failed! Make sure console is connected and in bootloader mode, they are probably missing the Microsoft Visual Studio drivers ​:!: \\
 \\ \\
-(C) NOTE: Requires .Net Framework 4.0 installed.+(C) NOTE: Requires .Net Framework 4.0 installed ​:!: \\
 \\ \\
 ----- -----
Line 31: Line 41:
 ===== Software ===== ===== Software =====
 \\ \\
 +====Installation instructions are available for====
 +|[[SupAircast:​start|{{ :​aircast_logo-webintro130x75_2x.png?​100 |Aircast}}]]|[[SupAircast:​start|{{ :​mairlist_logo_2x.jpg?​100 | Mairlist ​ }}]]|[[aeron:​start|{{ :​aeron_studio_logo_zonder_teksteffect_2x.jpg?​100 |Aeron}}]]|[[caliope:​start|{{ :​caliope.png?​100 |Caliope}}]]|[[myriad:​start|{{ :​myriad200x97_2x.jpg?​100 |Myriad}}]]|[[powerstudio:​start|{{ :​powerstudio_logo_d-r_bg.jpg?​100 |Power Studio}}]]|[[proppfrexx:​start|{{ :​proppfrexx_onair_logo_200px.jpg?​100 |Proppfrexx}}]]|
 +|  [[SupAircast:​start| ​ Aircast ​ ]]  |  [[SupAircast:​start| ​ Mairlist ​ ]]  |  [[Aeron:​start| ​ Aeron  ]]  |  [[caliope:​start| ​ Caliope ​ ]]  |  [[Myriad:​start| ​ Myriad ​ ]]  |  [[powerstudio:​start| ​ Power Studio ​ ]]  |  [[proppfrexx:​start| ​ Proppfrexx ​ ]]  |
 +
 +|[[radiologik:​start|{{ :​radiologik-run.png?​100 |Radiologik}}]]|[[Station playlist:​start|{{ :​station_playlist_logo.png?​100 |Station Playlist}}]]|[[playitlive:​start|{{ :​playitlive_2x.png?​100 |PlayItLive}}]]|[[playoutone:​start|{{ :​playoutone-logo-wko-400w.png?​100 |PlayoutOne}}]]|[[radiodj:​start|{{ :​rdj_logo.png?​100 |RadioDJ}}]]|[[zarastudio:​start|{{ :​zara_logo.jpg?​100 |Zara Studio}}]]|
 +|  [[radiologik:​start| ​ Radiologik ​ ]]  |  [[Station playlist:​start| ​ Station Playlist ​ ]]  |  [[playitlive:​start| ​ PlayItLive ​ ]]  |  [[playoutone:​start| ​ PlayoutOne ​ ]]  |  [[radiodj:​start| ​
 + ​RadioDJ ​ ]]  |  [[zarastudio:​start| ​ Zara Studio ​ ]]  |
 \\ \\
-**__Question:​__** My firmware update isn't working? ​\\+^**__Question:​__** My firmware update isn't working?
 +|**__Answer:​__** Link: [[nwfwupdateenc:​start|please follow the steps at this link]]|
 \\ \\
-**__Answer:​__** Link: [[nwfwupdateenc:​start|please follow the steps at this link]]+^**__Question:​__** How do I setup Aircast to work with my Airence?^ 
 +|**__Answer:​__** Link: [[aircastairence:​start|please follow the steps at this link]]|
 \\ \\
 +^**__Question:​__** My Airence meters aren't working?^
 +^**__Question:​__** How can I forward the meter information trough network?^
 +|**__Answer:​__** Link: [[airencemeters:​start|please follow the steps at this link]]|
 \\ \\
-**__Question:​__** ​How do I setup Aircast to work with my Airence \\ +^**__Question:​__** ​My Meter software shows a distorted screen, what can be the problem?^ 
-**__Answer:​__** Link: [[aircastairence:​start|please follow the steps at this link]]\\+|**__Answer:​__** Link: [[meterdistorted:​start|please follow the steps at this link]]\\|
 \\ \\
 +^**__Question:​__** How does the Airence Virtual Keyboard Mapper work?^
 +|**__Answer:​__** Link: [[airencevkm:​start|please follow the steps at this link]]|
 \\ \\
-**__Question:​__** ​My Airence ​meters aren't working\\+^**__Question:​__** ​How do I configure my Airence ​to work with Protools?
 +|**__Answer:​__** Follow this link to a instruction .pdf: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Airmate-Airence-protools.pdf|Airence protools]]|
 \\ \\
-**__Question:​__** How can I forward the meter information trough network? \\ +^**__Question:​__** Which playout software is supported to work with my Airence?^ 
-\\ +|**__Answer:​__** Link: [[playoutoftware:​start|Compatible Playout software]]|
-**__Answer:​__** Link: [[airencemeters:​start|please follow the steps at this link]]\\ +
-\\ +
-\\ +
-**__Question:​__** My Meter software shows a distorted screen, what can be the problem?​\\ +
-\\ +
-**__Answer:​__** Link: [[meterdistorted:​start|please follow the steps at this link]]\\ +
-\\ +
-\\ +
-**__Question:​__** How does the Airence Virtual Keyboard Mapper work? \\ +
-\\ +
-**__Answer:​__** Link: [[airencevkm:​start|please follow the steps at this link]]\\ +
-\\ +
-\\ +
-**__Question:​__** How do I configure my Airence to work with Protools? \\ +
-\\ +
-**__Answer:​__** Follow this link to a instruction .pdf: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Airmate-Airence-protools.pdf|Airence protools]]\\ +
-\\ +
-\\ +
-**__Question:​__** Which playout software is supported to work with my Airence?\\ +
-\\ +
-**__Answer:​__** Link: [[playoutoftware:​start|Compatible Playout software]]\\+
 \\ \\
 ----- -----
Line 71: Line 75:
 ===== USB ===== ===== USB =====
 \\ \\
-**__Question:​__** ​My USB Channel or other USB hardware isn't recognized, what should I do\\+^**__Question:​__** ​What bit and sample rate settings are supported by the soundcards?
 +|**__Answer:​__** The soundcards in our mixers support 16 bit 32kHz, 16 bit 44kHz and 16 bit 48kHz|
 \\ \\
-**__Question:​__** When connecting the USB, I receive a message that the maxmimum services or end points are  +^**__Question:​__** My USB Channel or other USB hardware isn't recognized, what should I do?^ 
-reached. How can I fix this?\\+^**__Question:​__** When connecting the USB, I receive a message that the maxmimum services or end points are reached. How can I fix this?
 +|**__Answer:​__** Link: [[usbnotworking:​start|please follow the steps at this link]]|
 \\ \\
-**__Answer:​__** ​Link: [[usbnotworking:​start|please follow the steps at this link]]\\+^**__Question:​__** How do I setup the routing of my USB codecs in Windows cause the sequence seems to be weird?^ 
 +|**__Answer:​__** ​Follow the first steps of this instruction website: [[aircastairence:​start|please follow the steps at this link]]
 +|Or read the information in these .pdf files: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​AIRENCE USB CHANNEL SEQUENCE.pdf|Airence USB Channel Sequence]] ​ [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​AIRENCE ROUTING USB CHANNELS.pdf|Airence Routing USB Channels]]|
 \\ \\
 +^**__Question:​__** How does USB HID protocol of the Airence work?^
 +|**__Answer:​__** Follow this link to a instruction .pdf: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​AIRENCE USB HID CONTROL PROTOCOL v0.5.pdf|Airence USB HID Control Protocol v0.5]]|
 \\ \\
-**__Question:​__** ​How do setup the routing of my USB codecs in Windows cause the sequence seems to be weird?\\+^**__Question:​__** I have an older version Airence with USB Noise, how can I solve this?
 +|**__Answer:​__** Follow this link to a instruction .pdf: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​AIRENCE USB NOISE-ENGLISH.pdf|Airence USB Noise]]|
 \\ \\
-**__Answer:​__** Follow the first steps of this instruction website: [[aircastairence:​start|please follow the steps at this link]]\\ +^**__Question:​__** ​Is my Airence ​compatible with OSX?^ 
-Or read the information in these .pdf files: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​AIRENCE USB CHANNEL SEQUENCE.pdf|Airence USB Channel Sequence]] +|**__Answer:​__** ​From version 9 your Airence is OSX compatible, the owners of earlier versions did need to tell us when ordering that they needed OSX compatibilityTo make your older version Airence OSX compatible yourself please follow this Link: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Airence OSX compatible.pdf|Airence ​OSX compatible]], or order an OSX compatible ​Airence ​10D/10E pcb.|
-[[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​AIRENCE ROUTING USB CHANNELS.pdf|Airence Routing USB Channels]]\\ +
-\\ +
-\\ +
-**__Question:​__** ​How does USB HID protocol of the Airence ​work?\\ +
-\\ +
-**__Answer:​__** ​Follow this link to a instruction ​.pdf: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​AIRENCE USB HID CONTROL PROTOCOL v0.5.pdf|Airence ​USB HID Control Protocol v0.5]]\\ +
-\\ +
-\\ +
-**__Question:​__** I have an older version ​Airence ​with USB Noise, how can I solve this?\\ +
-\\ +
-**__Answer:​__** Follow this link to a instruction .pdf: [[https://www.d-r.nl/​wiki/​dokudata/​faq/​airence/​AIRENCE USB NOISE-ENGLISH.pdf|Airence USB Noise]]\\+
 \\ \\
 +-----
 \\ \\
-**__Question:​__** Is my Airence compatible with OSX? \\+===== Microphone input ====
 \\ \\
-**__Answer:__** From version 9 your Airence is OSX compatible, the owners of earlier versions did need to tell us when ordering that they needed OSX compatibility. To make your older version Airence OSX compatible yourself please follow ​this Link[[https://www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Airence OSX compatible.pdf|Airence OSX compatible]],​ or order an OSX compatible Airence 10D/10E pcb.\\+^**__Question:__** How can I connect My mixer with Insert ​to a effects unit?^ 
 +|**__Answer:​__** See this picture:
 +|{{:insert_connections.jpg?200|}}|
 \\ \\
 ----- -----
 \\ \\
-===== Telco =====+===== Telco or Voip =====
 \\ \\
-**__Question:​__** ​When I use the Hybrid the caller hears echo's and it influences the sound of my mixer? ​\\+^**__Question:​__** ​How to use the Voip channel in my mixer?
 +|**__Answer:​__** [[howtovoip:​start|please follow the steps at this link]]|
 \\ \\
-**__Question:​__** When I connect my mixer somewhere else, do I need to re adjust the R and C balance? ​\\+^**__Question:​__** When I use the Hybrid the caller hears echo's and it influences the sound of my mixer?^ 
 +^**__Question:​__** When I connect my mixer somewhere else, do I need to re adjust the R and C balance?
 +|**__Answer:​__** Every phone line connection is different and has a different capacity due to Line length and differences in Central units.| 
 +|The N-1 and R and C balance are set at the factory to meet our phone lines.| 
 +|When you unpack your mixing console you have to adjust the R and C balance to meet the specifications of your phone line.| 
 +|So when you used "on the road" you'll have to adjust or at least check the R and C balance each time you connect a different phone line.| 
 +|Instructions on how to set the R and C balance can be found in this .pdf: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Airence N-1 and RC balance adjustments on location.pdf|Airence N-1 and RC balance adjustments on location]]|
 \\ \\
-**__Answer:__** Every phone line connection is different and has a different capacity due to Line length ​and differences ​in Central units.\\ +^**__Question:__** My telephone hybrid seems to have stopped working, how can I fix it?^ 
-The N-1 and R and C balance are set at the factory to meet our phone lines.\\ +^**__Question:​__** Due to higher ​Line and Ring voltages ​in some countries it can happen that resistors R17 and R18 where burned.^ 
-When you unpack your mixing console you have to adjust the R and C balance to meet the specifications of your phone line.\\ +|**__Answer:​__** ​Instructions can be found in this .pdf: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​TELCO AIRENCE MEMO-R17-R18.pdf|TELCO AIRENCE MEMO-R17-R18 modification]]|
-So when you used "on the road" you'll have to adjust or at least check the R and C balance each time you connect a different phone line.\\ +
-Instructions ​on how to set the R and C balance ​can be found in this .pdf: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Airence N-1 and RC balance adjustments on location.pdf|Airence N-1 and RC balance adjustments on location]]\\+
 \\ \\
 +^**__Question:​__** I needed to change the Relay on the telephone hybrid but the voltage supplied is to low, how can I fix this?^
 +|**__Answer:​__** Instructions can be found in this .pdf: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Airence-Telco Relay voltage.pdf|Airence Telco Relay voltage]]|
 \\ \\
-**__Question:​__** ​My telephone hybrid seems to have stopped working, how can I fix it?\\+^**__Question:​__** ​How can I add telephone signalling to my older type Airence Hybrids?
 +|**__Answer:​__** Instructions can be found in these .pdf files: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Telephone signalling.pdf|Telephone signalling]] [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​RED LIGHT Signaling when Phone call comes in.pdf|Red Light Signalling when Phonecall comes in]]|
 \\ \\
-**__Question:​__** ​Due to higher Line and Ring voltages in some countries it can happen that resistors R17 and R18  +^**__Question:​__** ​How do connect a Hybrid 1 to my mixer?^ 
-where burned.\\ +|**__Answer:​__** ​Follow the instructions ​in this .pdf document: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​hybrid2/How to connect Hybrid1.pdf|How to connect a Hybrid1]]|
-\\ +
-**__Answer:​__** Instructions can be found in this .pdf: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​TELCO AIRENCE MEMO-R17-R18.pdf|TELCO AIRENCE MEMO-R17-R18 modification]]\\ +
-\\ +
-\\ +
-**__Question:​__** ​needed ​to change the Relay on the telephone hybrid but the voltage supplied is to low, how can I fix this?\\ +
-\\ +
-**__Answer:​__** ​Instructions can be found in this .pdf: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/Airence-Telco Relay voltage.pdf|Airence Telco Relay voltage]] +
-\\ +
-\\ +
-**__Question:​__** ​How can I add telephone signalling ​to my older type Airence Hybrids?​\\ +
-\\ +
-**__Answer:​__** Instructions can be found in these .pdf files: [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Telephone signalling.pdf|Telephone signalling]] [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​RED LIGHT Signaling when Phone call comes in.pdf|Red Light Signalling when Phonecall comes in]]\\+
 \\ \\
 ----- -----
Line 136: Line 135:
 ===== On Air, Mic on, Fader start, GPO ===== ===== On Air, Mic on, Fader start, GPO =====
 \\ \\
-**__Question:​__** I want to connect my Fader start to my CD player, Turntable or other player, how do I have to connect this?\\ +^**__Question:​__** I want to connect my Fader start to my CD player, Turntable or other player, how do I have to connect this?^ 
-\\ +|**__Answer:​__** Instructions can be found in this webpage: [[faderstartinstr:​start|Fader start instructions]]|
-**__Answer:​__** Instructions can be found in this webpage: [[faderstartinstr:​start|Fader start instructions]] +
-\\+
 \\ \\
   * [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Akiyama_fdstart.pdf|Akiyama Faderstart]]   * [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Akiyama_fdstart.pdf|Akiyama Faderstart]]
Line 153: Line 150:
 ===== Repair and Modification ===== ===== Repair and Modification =====
 \\ \\
-**__Question:​__** What are the differences in versions? ​\\ +^**__Question:​__** What are the differences in versions?^ 
-\\ +|**__Answer:​__** Link: [[airenceversion:​start|please read the info at this link]]|
-**__Answer:​__** Link: [[airenceversion:​start|please read the info at this link]] +
-\\+
 \\ \\
   * [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Airence 2013-2014 compatibility.pdf|Airence 2013-2014 compatibility]]   * [[https://​www.d-r.nl/​wiki/​dokudata/​faq/​airence/​Airence 2013-2014 compatibility.pdf|Airence 2013-2014 compatibility]]
Line 182: Line 177:
   * [[https://​www.youtube.com/​watch?​v=1mD7JKfRlD0|D&​R USB codec channel configuration for a Airlite, Airence or Airlab]]   * [[https://​www.youtube.com/​watch?​v=1mD7JKfRlD0|D&​R USB codec channel configuration for a Airlite, Airence or Airlab]]
 \\ \\
------ +[[start:​|{{:​iconhome.png?​100|Home}}]]
-\\+
supairence/start.1575885965.txt.gz · Last modified: 2019/12/09 11:06 by support