User-agent: * Disallow:
Also the master section has various options to fine trim the mixer to your needs.
On th left you see the software pages that can be programmed by yourself and it gives you an overview of its possibilities.
There are settings that adjust the Silence Detection with parameters for Threshold, Interval time and the source.
You can even program the switch colors you personally like.
Also the CUE bus can be set to behave interlocking, which means that when you select another CUE the earlier selected CUE automatically switches off.
Don't let the simple lay-out fool you, there is much going on beneath the front panel to make your life easier as DJ!
Mic Line Channel
The Webstation has an internal USB voice tracking bus that can be directly routed to a play-out system with Voice tracking capabilities, such as our AIRCAST software.
A very low noise mic input, followed by a 2 band equalizer, drives a smooth running fader controlling a stereo VCA. The faderstart is electronically detected by the control voltage generated by the fader. The Webstation can also be used for production while ON-AIR when it is put into the NON-STOP mode.
The NON-STOP switch (located in the master section) routes the first USB channel (3) directly to the main outputs.
It does this automatically when the
internal silence detector detects silence. The CUE switch is also a communication system to easily talk to callers from outside.
The ON switch and the fader have “faderstart” capabilities if required.
Your personal settings for modules and master can stored in software.
The Webstation is designed for ON-AIR Internet radio production work in the studio or at home.
Every Webstation USB Channel can accept a stereo source from a play-out system such as our AIRCAST.
Levels can be set by the gain control. Pre listening can be done by the CUE switch and the ON switch can activate tracks of the Play-out system.
This can also be done by “faderstart”. The fader controls a high quality stereo VCA.
If you run a classic station with CD players, the USB input can be also set to accept stereo line signals.
The CUE is also a communication bus that allows callers on the VoIP channel to listen to the music and DJ when its CUE is activated without being on-air.
There are three USB stereo in- and outputs available on the Webstation. The inputs are internally routed to channel 3 to 5 where the USB input of channel three is also routed to the Non-Stop switch when activated. So your station never sleeps even if you are sleeping. The USB outputs, seen as inputs on your PC, are connected to the Program output and Voice track bus.
Channel 6 of the Webstation mixer is a dedicated Voice Over Internet Protocol channel. (VoIP).
Simply set up a connection, for instance with SKYPE or any other provider that offers telephone services over the Internet.
It needs to be a service provider that allows you to use VoIP for your telephone connections.
A separate Gain control and VoIP send control let you adjust the send and return levels.
An incoming call can be picked up by the Conn button, pre-listened by the CUE switch and brought into your radioshow by the ON switch and/or Fader.
If you want to use an analog or digital telephone hybrid, we have added an extra cleanfeed output on the back of the console to feed an external hybrid and return the signal into the line input of your VoIP channel with the input selector selected to Line.
The DJ Mic can be routed to the caller outside the broadcast by activating the CUE switch in both Mic and VoIP input modules.
All in all a very convenient way to broadcast ON-AIR with your callers.
USB Control Section
In the control SECTION of the Webstation mixer you see 12 illuminated (green/red) switches.
These switches can be used to control functions in your Radio Automation Software
such as starting jingles.
Recording a voice track while ON-AIR is also possible. The USB control software, included as part of the package, can be easily programmed to make radio even more exciting.
Any switch can perform a function of your play-out software that you decide to control.
Master controls can be found in the master section for Phones and CRM.
When activating the Auto Cue for CRM any selected CUE can be heard.
As soon as the DJ mic opens, the CRM mutes to avoid feedback but only if CRM auto
Cue (auto deactivate) is set to ON.
The NON-STOP switch instantly routes the first USB stereo signal (channel 3) to the master outputs which makes the mixer available for (pre) production again.
Power Supply and more
The Webstation is powered by an internal heavy duty switched mode power supply that accepts AC voltages between 90 volt and 264 volts and has a standard Euroconnector with fuse on the back of the frame.
The control surface can be easily mounted inside furniture as a drop through unit. All in and output connections are conveniently made on standard Jack / Cinch and XLR connectors.
The Webstation sends out control signals over USB, based on the HID protocol.
This also means that the master output signals can be displayed on a TFT screen (not supplied) in a beautiful meter application.
Program and CRM stereo signals are shown on a high resolution Peak Program Meter
On the right side of this screen you see the status of various console functions.
Indicators such as NON-STOP mode, Silence detection,
Mic-On and CRM mute.
Channel status and input selection is displayed at the
bottom of the TFT screen (not supplied).
At the same time this software application shows you a professional looking Radio clock that is synchronized with your local PC and an NTP time server.
The uncluttered and clearly understandable features make it the ideal tool for making radio programs.
The Webstation is compact, reliable and ideal for production rooms.
It can be used as your main stations On-Air mixer or used as your home Internet Radio station.
We hope to have given you an idea of the huge potential of this new WEBSTATION broadcast mixer.
If you need more info than presented here on our web page
you can download the manual for even more in depth info.
Play out Software
With the WEBSTATION mixer you can now own a modern radio mixer for a very attractive price.
This new hand built piece of precision equipment is the result of more than 47 years of experience at D&R.
It is an intelligent mixer with an internal USB control section that speeds up daily use and includes a built in Silence Detector.
It is a reliable workhorse for the self-op production D.J. with built in Telephone VOIP functionality.
3 in/out channels of stereo USB and 3 very low noise Mic inputs.
The WEBSTATION, ideal for ON-AIR, Production and perfect for streaming to the web.
The WEBSTATION accepts and instantly controls a maximum of 3 in/out stereo channels from your Play-out software.
RADIO PLAY-OUT SYSTEMS
with dedicated software
Freeware Radio Play-Out Software that can work with our Keyboard mapper software
RADIO PLAY-OUT SYSTEMS
that can work with our keyboardmapper
Dear D&R team,
I went through the RADIODJ tutorial you have published on your wikipedia page.
I found it very useful and now Webstation is working perfectly with RadioDJ software.
I really want to thank you for your professionalism and responsiveness.
You can be sure I will be a D&R ambassador in Italy.
Best regards, SABA
Remote Studio solutions
• D&R WEBSTATION Review by
• For the full review, check out here
Apple OSX compatible
Gert Meppelink Studio
Installation by Radio Trend Switzerland
Installation by Radio Trend Switzerland
I love my webstation, High quality audio for my live Twitch stream. Wade Wilson