Only € 550,--
- HD-Voice (AMR-WB/G722.2)
- Balanced Audio in/Out
- Echo cancelling
- Digital EQ Control
- Configurable AGC
- PC control application via USB
- Also for mobile applications 12 volt DC car battery powered
- Ideal for areas without land lines
- Ideal for OB vans
- Simple GPIO Interfacing with alert on jacks
- Voice quality improvement over ordinary Hybrids
Ask your dealer for the price
With the D&R GSM Hybrid you can add a simple and effective wireless interface that your reporters can call.
With features like HD voice, Echo canceling, digital EQ and application control over USB on your PC it is a nice tool to expand the communication
possibilities of your studio with your reporters in the field.
The GSM Hybrid has its own number reporters directly can dial, the call can be taken on the mixing console due to built in GPIO’s.
The electronics are housed in a sturdy metal 9.5” rack mount case with antenna’s on the front side for optimum receiver conditions.
An external 12 volt power supply adapter is part of the delivery. Software features are in and output metering and level control, phone dialing, number recognition and GSM signal strength indication.
The Alert feature is implemented to let a reporter in the field ‘wake-up’ a DJ behind the desk to start an interview. Assumed is that a connection is already there and the DJ is doing some other work in the studio while the reporter waits for the moment to start the interview. On that moment the reporter only has to press the ‘0’ on his phone to Alert the DJ. In the main window of the GSM Hybrid Control application the background starts blinking red for 2 seconds.
Also the GPO output alternates with this Alert signal. Doing so, the DJ knows the reporter is ready for the interview and he can mix in the reporter to the show.
If the GPI is wired a call can be picked up on the mixing console when the GPI is connected to the GSM's GPI jack connector.
Highlites
Brochure
Manual V2.10
New features ( October, 2019)
- New Address book is added to the software with number recognition.
- Auto Connect: The application ‘GSM Hybrid Control’ automatically connects to the device on start-up or re-connect if USB connection is lost.
- Auto Answer, the application now picks up the line after one ring signal.
- A black/white list of numbers is under design.
- All settings done in the application are now stored in the internal GSM memory. It means the GSM Hybrid works independently from a running application once programmed and can be used in the field without a PC.
- A fast Factory Reset is possible by pushing the CONNECT button 15 seconds.
- The communication between the GSM Hybrid and PC is completely redesigned and based on the proven AIRLITE communication protocols.
- NOTE: In case existing users want to update the GSM Hybrid application
software, they also have to download the latest firmware to get all the
extra’s at https://www.d-r.nl/wiki/dokuwiki/doku.php?id=supgsmhybrid:start
Software updates
- Input and output level meters (ppm)
- Input and output gain adjust
- Software keypad dialing
- Number recognition
- Built in address book
- GPIO configuration
- GSM signal strength indicator
- Easy sim card changing
- Dual diversity antenna's
- More units in 1 software application possible
- Alert function with "open line via DTMF"on screen and GPO
Calling
Equalizer
Send Receive levels
Phone book
TIP!
If you need higher audio quality than your regular digital or analog studio hybrids give you, use this GSM Hybrid as your main studio number.
Anyone who then calls you (and has a HD Voice subscription) will talk to you with an extended bandwidth up to 7kHz., this results in clear natural sounding audio.
It makes your studio sound a lot more professional and increases intelligibility quite substantial. Just give it a try.
If you want to install one GSM-Hybrid in a 19" rack you can use our mounting kit and 1x 9.5" blind panel. See below.
If you want to install two GSM Hybrids you need only the mounting kit, see picture above
Mounting kit € 17,--
Dear Sirs,
For several weeks, we are using your D & R GSM Hybrid.
This is a very good device and it has a good sound.
Best regards,
Andrzej
Specifications
: Balanced, 20kOhm, +22dBu max,
: Balanced, 50Ohm, +21.5dBu max
: 50 Hz up to 7000 Hz
: USB 1.1
: Opto Fet 60V/550mA,
Pmax=500mW
: Pulldown to GND.
: Use opto coupler
: 850/900/1800/1900MHz
: SMA connector
: standard (largest one)
: 241mm (9,5 inch)
: 3mm
: 174mm
: 44mm (1HE)
: 2kg
: Adapter 90-230volt AC 50/60Hz
: 12Vdc
: Less than 1 Amp
: 7436917139176
The D&R GSM Hybrid uses the following GSM bands
FDD LTE: B1/B3/B5/B7/B8/B20
UMTS: B1/B5/B8
GSM: 850/900/1800/1900MHz
and can be used in the following areas.
1. North American Region (Canada and the US) Caribbean and Latin America.
(GSM-850 & PCS-1900)
2. Europe, the Middle East and Africa, Asia-Pacific
(E-GSM-900 & DCS-1800)
See also this WIKIPEDIA page for more detailed info.
GSM Certificate Approvals:
CE/ FCC/ IC/ KC/ NCC/ OFCA/ GCF/ PTCRB/ RCM/ SKT/ AT&T/ Rogers/ ANATEL/ Vodafone/ TA/ NAL/JATE/ TELEC/ DoC_For_Russia
Data Sheet
Software updates
SPECIFICATIONS
Line input
Output
Frequency response
USB
GPO
GPI
Tip:
GSM Bands
Antenna
SIM card type
DIMENSIONS/WEIGHT
Left-Right
Front thickness
Front to back
Height
Weight
Power
Voltage
Supply Current
EAN CODE
TIP !
A great complementary product for our GSM Hybrid is the Audio Adapter SmartRig-2
that we can offer as an "in the Field" product for only € 49,95
Together with a dynamic or condenser Mike, headphones and a smart-phone (Android or Apple) running a
recording app on it could be your complete mobile reporter set for a minimum of investment.
Live reporting to the Studio in Voice-HD directly to our GSM Hybrid is now possible (depends on your GSM and provider)
