Recent Posts

Pages: [1] 2 3 ... 9
1
Lyra / Re: adding cobranet
« Last post by DNR Support on February 13, 2018, 01:42:20 PM »
Hello,

It is possible to add a cobranet card afterwards.
If you have enough electonics knowledge and work in a ESD safe situation you can do it your self.

For prices contact you're supplier or send a email to info at d-r dot nl.

https://www.d-r.nl/wiki/dokudata/faq/lyra/LyraCobranetSetup.pdf
2
Lyra / adding cobranet
« Last post by playloud on February 13, 2018, 01:33:11 PM »
Hi, is it possible to ad the optional cobranet to an existing lyra unit? how and what would it cost?

Thnks,

Thomas.



3
Question:
How can I restore the factory settings of my Lyra

Answer:
See the next pdf files
https://www.d-r.nl/wiki/dokudata/faq/lyra/Lyra%20FTP%20backup%20manual.pdf
https://www.d-r.nl/wiki/dokudata/faq/lyra/LYRA%20Factory%20RESET.pdf

To download the software bundles follow these links.
ActiveX, Device pool, Manual: http://www.d-r.nl/wiki/dokudata/software/Lyra%20software.zip
CoreFTP, Total snapshot, FTP manual, Settings backup manual etc.: http://www.d-r.nl/wiki/dokudata/software/Lyra%20Factory%20reset%20bundle.zip
4
Airmate / PSU hum: My Airmate generates a hum at the headphone and other outputs.
« Last post by DNR Support on January 22, 2018, 09:45:44 AM »
Question:
My Airmate generates a hum at the headphone and other outputs. How can we fix this?

Answer:
This is probably because the bridge rectifier D1 in the Airmate is defective.
We use a 2KBB100 bridge rectifier as replacement part.
Replacing this must eliminate the hum.
If you still hear some hum left it sometimes helps when you loose the screw of the transformer and
slowly turn the transformer to the point of minimal hum. (be carefull with the wiring).

https://www.d-r.nl/wiki/dokudata/faq/airence/We%20have%20a%20Hum%20on%20outputs%20replace%20the%20bridge%20rectifier.pdf
5
Airlite / Re: Possible to disable preamp on Mic input?
« Last post by DNR Support on January 22, 2018, 09:09:16 AM »
Hello,

There is no way to disable the mic driver.

It is possible to connect the processor to the Line RCA or to the input side of the Insert Jack (See page 17 of the manual https://www.d-r.nl/assets/airlite-manual_v1.08.pdf).
For the RCA input it is possible to set the Mic at Line option in the Airlite Configuration Manager to use the CRM mutes and other Mic functions.
6
Airlite / Possible to disable preamp on Mic input?
« Last post by Klaas on January 20, 2018, 03:32:57 PM »
Hi,

I would like to use an external preamp and some compressor/gate/limiter devices with the Airlite. Is it possible to disable the preamp on the Mic Input of the Airlite?

It seems that even if I disable phantom power and turn gain to 0 the input is still doing something with the signal which makes the voice sound distorted and extremely loud. If I connect the processor to the RCA connector everything sounds fine but I don't have any proper Y cables to get from mono XLR to the stereo RCA connectors.

Thanks.
7
Aircast / Aircast update to version 6.0: how does it work?
« Last post by DNR Support on January 18, 2018, 10:58:33 AM »
Q: I received the update of aircraft 6.0, can you tell me how to integrate it in place of version 5.3 that I had so I could use it on a daily basis

A: When you downloaded AIRCAST 6.0, you can install it and then it automaticly in a new folder next to Aircast 5.3.
When entering the license manager it asks you to register.

When you had a dongle license registration you'll need to send us the Dongle ID number and you're registration info.
This way we can set a license file ready at you're login. After downloading this file to you're aircast the registration should be completed.

When you had a software license registration you'll already have a login and the new license file has to be added to that registration.
After downloading the new license file to you're aircast the registration should be completed.

When starting up the first time it should ask you to import the setttings from the previous version.

https://www.d-r.nl/wiki/dokudata/faq/aircast/AIRCAST%20LICENSE%20ACTIVATION.pdf
8
Webstation / Re: Webstation on Mac with Radiologik DJ
« Last post by Claudio on January 17, 2018, 10:26:20 AM »
Hi!

Found the issue: Radiologik listens to the Airlite Ports. That cannot be changed in Radiologik. So I changed Ports to Metering: 19548, Config: 19549, Custom: 19550, Listen 19551 and it works. Need also to change "Meter" and Configuration Manager
9
Webstation / Radiologik DJ
« Last post by DNR Support on January 17, 2018, 09:27:39 AM »
Frequently Asked Quesions

To be posted at a later moment.

Usefull videos:

Radiologik DJ - Setup: https://www.youtube.com/watch?v=a5I8q8fiEgo

Radiologik DJ - A live example: https://www.youtube.com/watch?v=Rc01NoZ_4Nk
10
Airlite / Radiologik DJ
« Last post by DNR Support on January 17, 2018, 09:27:22 AM »
Frequently Asked Quesions

To be posted at a later moment.

Usefull videos:

Radiologik DJ - Setup: https://www.youtube.com/watch?v=a5I8q8fiEgo

Radiologik DJ - A live example: https://www.youtube.com/watch?v=Rc01NoZ_4Nk
Pages: [1] 2 3 ... 9